The demand for them changes over time. This is also true for the construction industry. AAC blocks are becoming increasingly popular and have emerged as the ideal option for those seeking the best construction option. Blocks AAC has emerged as a viable option for a variety of reasons. We will be aware that these blocks differ significantly from conventional ones. As a result, the installation procedure varies as well.
Read the following article if you are excited about the concrete AAC block installation process.
Steps for Installing Lightweight AAC Blocks: Set wall stakes One way to align AAC building blocks with the concrete wall is to align the outside block margin. You can determine whether the stake is in a straight line by making use of building supplies like a string line and a rubber mallet.
Establish the foundation Concrete forms the base of the wall and must be four inches wider than the blocks for the concrete to develop the required strength.
Block laying For best adhesion, make sure the AAC bricks are completely wet before laying them down. Before proceeding, you should brush the area thoroughly. Make sure that each block completely covers the adhesive before placing it next to the others.
Wall masonry curing Only concrete cement mortar requires curing for added strength; Bond Beam To increase the rigidity and strength of masonry walls, two coping beams must be placed between the blocks after they reach a height of 1.2 meters. Wall masonry curing Curing is not required for ready-mix mortar.
Cutting blocks with a hacksaw or rotary cutter is the best way to get a good finish on the blocks.
Lentil Help
The AAC blocks should have edge backing of somewhere around 200 mm. The lentil ought to be positioned beneath the mortar bed for additional stability.
Last but not least, plastering requires a thickness of at least 15 millimeters for a smooth and clear finish.
No comments:
Post a Comment